Toput has successfully developed a light source fo

Opter has successfully developed light sources for glass defect detection

Dongguan opter Automation Technology Co., Ltd. specializes in the production of machine vision light sources. Opter has been committed to the development and application of new products. 1 Test method for ultraviolet light aging resistance of polyethylene: mainly used to detect the tensile strength and elongation at break before and after light aging. Recently, we have successfully developed ultra long strip light source, which can be used in large equipment! At the same time, the company pays attention to product optimization and improvement and continuous innovation, so that the quality and performance of the light source are continuously improved

model: opt-li262534

voltage: 24v

power: 38W red/yellow/infrared

49w white/Blue/Green/UV

optional accessories: DP digital controller, AP analog controller, diffuser plate

this light source is specially designed for glass defect detection. The light source is located below the tested glass, which is perpendicular to the moving direction of the glass, and the camera group is located above the tested glass. Detect the defects in the glass production process, such as inclusions, bubbles, light distortion, etc. Jinan experimental machine factory - Jinan gold assay experimental machine factory analyzes the score of the first notch. If it is required to take the total elongation class identification under * strong force

Product characteristics:

2.6m ultra long strip light source

strip light source is the preferred light source for the measured object with large square structure

the color can be matched according to the demand and combined by itself

the irradiation angle and installation can be adjusted at will

application:

glass defect detection

for large workpiece detection

metal surface inspection

image scanning

surface crack detection

lcd panel detection, etc

drawing: